Table of Contents
Advertisement
TROUBLE-SHOOTING
7-4
User's Manual
Table 7.1 Print Quality Problems and Solutions (Cont.)
Problem
Printing is vertically
misaligned (jagged).
The top margin is
wrong.
Lines are double
spaced instead of
single spaced.
The printer
overprints on the
same line.
Solution
Use the printer's V-ALMNT function to check
the vertical print alignment. If necessary, adjust
the print alignment. See the section Using the
Diagnostic Functions in Chapter 5.
Smaller adjustment for paper thickness causes
vertically misalignment too.
Please refer to Printing is too light or too dark.
The top margin is the sum of the top-of-form
setting, the software-specified top margin, and
the printer's TOP-MRG setting. Proceed as
follows:
•
Make sure that the top-of-form setting is
correct. The factory default is 25.4 mm (1
inch). See the section Changing Top-of
Form in Chapter 5.
Check the software-specified top margin.
•
Refer to your software documentation.
•
Check the printer's TOP-MRG setting. See
the section MENU1 and MENU2 Items
and Options in Chapter 5.
Check the line spacing setting in your software.
Change the CR-CODE setting in the printer
setup mode to CR ONLY. See the section
MENU1 and MENU2 Items and Options in
Chapter 5.
Change the CR-CODE setting in the printer
setup mode to CR & LF. See the section
MENU1 and MENU2 Items and Options in
Chapter 5.
TROUBLE-SHOOTING
User's Manual
7-4
Advertisement
Table of Contents
