Table of Contents
Advertisement
USING SETUP MODE
5-60
User's Manual
Table 5.7 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG
Options
Items
<CNT-LD>
PRCIS-1
PRCIS-2
SPEED
<CSF-LD>
NORMAL
SWBACK
<CSFAPTC>
NORMAL
ALWAYS
USING SETUP MODE
Description
Selection for the paper feeding of
continuous forms paper
Precision is the first priority.
Speed is the first priority.
Reduces the disturbance of line
break outstretching fold of the paper
by over feeding during the process of
paper feeding
Speed is the first priority.
Selection of the method of feeding
from the CSF
Feeds paper directly from the CSF
hopper.
Feeds paper from the CSF hopper to
either the paper table used with a
front CSF or the stacker used with a
rear CSF. Then, that paper is fed
again.
Paper thickness detection with use of
a CSF
Sheet of paper that is fed immediately
after the feed bin is switched
Detect the paper thickness at 1st page
when printing from Cut sheet feeder
continuously.
Detect the paper thickness of every
paper when printing from Cut sheet
feeder.
User's Manual
5-60
Advertisement
Table of Contents
