Table of Contents
Advertisement
USING SETUP MODE
5-25
User's Manual
Table 5.4 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
Underlined options are the factory defaults.
•
Asterisks identify items and options that differ for the IBM XL24E
•
and Epson ESC/P2 emulations. The notes are defined at the end of
the table.
MENU1 and
Options
MENU2 Items
<TOF-ORG>
-1/6 IN
0/6 IN
1/6 IN
1.8/6 IN
:
6/6 IN
:
66/6 IN
<TOFFINE>
0/180, ...,
29/180
<TOP-MRG>
## LINE
USING SETUP MODE
Description
Sets the top-of-form for sheets and papers in
increments of 1/6 inch (4.2 mm) from the
physical top of the page.
The default is recommended if your top
margin is not software-specified. A setting
of 1/6 inch is preferable when your top
margin is software-specified.
Fine-tunes the top-of-form.
Increases top-of-form in increments of 1/180
inch
(0.14 mm).
Specifies the number of space lines for the
top margin. The resultant blank space is the
<TOP-MRG> setting minus 1 line.
The total size of your top margin is the above
resultant value plus the following two
settings: top-of-form (default = 1 inch) and
the software-specified top margin. If you are
using software to specify the top margin, use
the default (1 line) for <TOP-MRG>.
1, 2, 3,4, 5, 6, 7, 8, 9, or 10 lines
User's Manual
5-25
Advertisement
Table of Contents
