Fujitsu Impact 4550 PRO User Manual page 119

USING SETUP MODE
5-17 User's Manual
Table 5.3 Required Options (Cont.)
Function Item
HARDWRE FORMAT
BAUD-RT
PROTOCL
DSR
DUPLEX
CTS
CD
ADJUST None
CONFIG None
GAP-ADJ None
Option
If you have a serial interface, the serial interface
options selected on the printer must be the same
as the settings you selected using your software or
your computer operating system. If the settings
are not the same, the printer will not print or will
print garbage.
See the section Hardware Items and Options
later in this chapter.
If you are not using software to specify the top
margin of the page, use the printer's default top-
of-form setting, 1 inch (25.4 mm) from the top of
the paper. If you are using software to specify the
top margin of the page, change the default setting
to 1/6 inch (4.2 mm).
See the section Print Position Adjustment Items
and Options later in this chapter.
You can change the printer's primary
configuration.
See the section Configuration Items and
Options later in this chapter.
If you adjust the gap manually or fix the gap,
change the setting.
See the section Print Head Gap Adjustment
Items and Options.
USING SETUP MODE
User's Manual 5-17