Table of Contents
Advertisement
MAINTENANCE
6-8
User's Manual
7. Attach the green ribbon guide on the print head.
Please make sure that the ribbon slack lightly. (If the ribbon is
strained, it will quirk when installation.)Push the green ribbon guide
until the triangle mark"
Ribbon Guide
8. Turn the ribbon feed knob clockwise to take up any slack in the
ribbon.
9. Return the control panel.
10. Close the front cover.
NOTE
A GLOBALIS ribbon cassette is recommended. Don't use
other cassettes. If other cassettes are used, operating
problems or a damage of the print head may be caused.
" meets the round projection of print head.
Print Head
Triangle mark
Projections
Knob
MAINTENANCE
User's Manual
6-8
Advertisement
Table of Contents
