Fujitsu Impact 4550 PRO User Manual page 157

USING SETUP MODE
5-55 User's Manual
Table 5.7 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG Options
Items
GATHER
ENABLE
DISABLE
CUT-CTL
PRCISIN
SPEED
USING SETUP MODE
Description
Setting of ribbon protective control
at a line feed on continuous forms
The protective control is executed.
The protective control is not
executed.
Setting of retracting control at
canceling TEAR OFF of continuous
forms.
The precision-prioritized retracting
control is executed.
It retracts a certain amount of paper
(the top part of the paper which
hangs out from the TOFS), and then
moves back to the position before
TEAR OFF. If TOFS detects paper
end when a certain amount of paper
is retracted, it executes the
continuous forms save operation
and then executes the paper loading
operation.
The speed-prioritized retracting
control is executed.
It retracts the paper by the amount
the paper was advanced.
User's Manual 5-55