Table of Contents
Advertisement
USING SETUP MODE
5-36
User's Manual
Table 5.5 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Options
Items
<PRT-DIR>
BI-DIR
UNI-DIR
<BUZZER>
ON
ON-1
ON-2
OFF
<WORD-LG>
8 BIT
7 BIT
USING SETUP MODE
Description
Bidirectional printing. The printer prints in
either direction while seeking the next print
direction for a shorter print time.
Unidirectional printing. Unidirectional
printing is used for printing vertical lines in
tables even if vertical alignment is not
adjusted. Unidirectional printing is slower
than bidirectional printing.
Enables or disables the printer status buzzer.
Buzzer on (recommended).
The printer beeps to indicate paperout or
other conditions.
Buzzer on (Low quality)
Sound in bass (Low frequency sound)
Buzzer on (High-quality sound)
Sound in high-pitched tone (High frequency
sound)
Buzzer off under any conditions.
To determine the required word length, refer
to your computer documentation. Select 8-
BIT to print bit image graphics.
8-bit word length (used by most computers)
7-bit word length (MSB = 0)
User's Manual
5-36
Advertisement
Table of Contents
