Table of Contents
Advertisement
USING SETUP MODE
5-31
User's Manual
Table 5.4 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
Underlined options are the factory defaults.
•
Asterisks identify items and options that differ for the IBM XL24E
•
and Epson ESC/P2 emulations. The notes are defined at the end of
the table.
MENU1 and
Options
MENU2 Items
<AGM>
ON
(*5)
OFF
<PRF-SKP>
SKIP
NO-SKIP
<WIDTH>
13.6 IN
11.4 IN
11.0 IN
8.0 IN
<ZEROFNT>
NO-SLSH
SLASH
Description
Enables the graphic image command.
Disables the graphic image command.
For continuous forms, this option specifies
whether an inch is skipped around the
perforation. If you are not using software to
specify a bottom margin, select SKIP when
using thicker, multipart forms.
One inch is skipped around the perforation.
The perforation is not skipped. Printing
continues in the bottom margin of the page.
13.6-inch page width
11.4-inch page width
11-inch page width
8-inch page width
Specifies whether to print the number zero
with a slash. This is useful to distinguish the
capital letter "O" from the number "0".
Invalid for some soft fonts.
0
0
USING SETUP MODE
User's Manual
5-31
Advertisement
Table of Contents
