Table of Contents
Advertisement
12V TRIGGER OUT jack
a Monaural mini plug cable (ø1/8"/3.5 mm)
BD/DVD
When connecting a device equipped with a 12V TRIGGER IN jack such as a
BD/DVD player to this unit, the device can be turned on or set to standby by
interlocking the operation on this unit. When the desired input is selected on
the unit, power link operation will be activated with a control signal of maximum
12 V/100 mA from the 12V TRIGGER OUT jack.
• For connection, use a monaural mini plug cable (ø1/8"/3.5 mm) without
resistance. Do not use a stereo mini plug cable.
Setup
• Settings are required to output control signals from the 12 V TRIGGER OUT
jack. Press the
button on the remote controller, select the input desired for
"Hardware" - "12V Trigger" ( →p156), and set the output destination for the
control signal.
Connections
77
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
