Pc (Default Value - Onkyo TX-RZ70 Instruction Manual

4. Source
OPTICAL When giving priority to input signal from DIGITAL IN OPTICAL
jacks
• This item can be selected only when the input to be set is
assigned to the OPTICAL jack in the "Input/Output Assign" -
"Digital Audio Input" setting.
Analog When giving priority to the input signal from AUDIO IN jacks
• This item can be selected only when the input to be set is
assigned to the AUDIO IN jack in the "Input/Output Assign" -
"Analog Audio Input" setting.
‰ PCM Fixed Mode (Default Value: Off)
Select whether to fix input signals to PCM (except multi-channel PCM) when
you select "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting. Set
this item to "On" if noise is produced or truncation occurs at the beginning of a
track when playing PCM sources. Select "Off" normally.
• Each time the "Audio Select" setting is changed, the setting is restored to
"Off".
• The setting cannot be changed when "TUNER"(*), "NET", or "BLUETOOTH"
input is selected.
* North American and Taiwanese models
„ Video Select
When "NET" or "BLUETOOTH" input is selected, you can set the input from
which video is displayed on the TV.
‰ Video Select (Default Value: Last)
Last Select the video input played immediately prior.
BD/DVD, Play the video of each input.
• This setting is effective for an input selector which is
GAME,
CBL/SAT, assigned in "Input/Output Assign" - "HDMI Input" and "Video
STRM BOX, Input".
PC, • When "TUNER" is selected on the North American or
CD, Taiwanese model, the radio received by the tuner built into
TV, the unit is played.
PHONO,
TUNER
• If the OSD language is set to Chinese, you can only select this setting when
"TUNER" is selected as input. (European, Australian and Asian models)
Setup Setup
146