Onkyo TX-RZ70 Instruction Manual page 167

7. The guidance about outputting the test tone is displayed. Refer to the
illustration to set up the speaker setup microphone in the listening position.
Follow the on-screen instructions to measure.
• Measurement may not be possible if the test tone is too loud or too soft.
Tap "Level Adjust" to adjust the volume of the test tone.
8. When measurement is complete, "Calculating results" is displayed on the
screen. Tap "Transfer to your product" to transfer the measurement data to
the unit.
9. Disconnect the speaker setup microphone.
The speaker adjustments based on the measurement results are saved in
the unit. You can modify 3 patterns of the filter curves from the measurement
results and register them in 3 slots ( →p172). The filter curves that you
register can be selected with "Room EQ" - "Dirac Live" ( →p93) in "Quick
Menu".
• When Dirac Live is used for measurement, the measurement results are also
reflected in "Speaker" - "Distance" ( →p137) in the Setup menu, and you will
no longer be able to change the values. (The setting units are displayed as
"msec".)
Setup
167