Onkyo TX-RZ70 Instruction Manual page 75

Network Connection
a Ethernet cable
This unit can be connected to the network using a wired LAN or Wi-Fi (wireless
LAN). You can enjoy network functions such as Internet radio by network
connection. If connection is made by the wired LAN, connect the router and the
ETHERNET jack with the Ethernet cable as shown in the illustration. To connect
by Wi-Fi, select your desired setting method in "Network Connection" ( →p164)
of Initial Setup, and then follow the on-screen instructions. To configure the
setting on the Setup menu after the completion of Initial Setup, press the
button on the remote controller, and select "Hardware" - "Network" to make the
setting ( →p149). For the Wi-Fi connection, stand the wireless antenna for use.
Note
• For security reasons, always connect via a router, etc., when connecting this
unit to the Internet. Do not directly connect to the communication circuits
(including public wireless LAN) of a telecommunications provider (mobile
communications company, fixed-line communications company, Internet
provider, etc.).
Router
Connections
75