Onkyo TX-RZ70 Instruction Manual page 156

5. Hardware
„ 5. 12V Trigger
Set when outputting the control signal (maximum 12 V/100 mA) through the 12V
TRIGGER OUT jack. You can enable power link operation when you connect the
unit and the external devices equipped with 12V trigger input jack.
‰ Zone (Default Value: Main)
Set which zone to output the 12V trigger when playing. If you select "All", then
the 12V trigger is output to all zones that are playing.
Off
When the control signal is not output
Main When controlling the power of external devices linked to the
input selection in the main room
Zone 2 When controlling the power of external devices linked to the
input selection in ZONE 2
Zone 3 When controlling the power of external devices linked to the
input selection in ZONE 3
All When controlling the power of external devices linked to the
input selection in the main room, in ZONE 2 or in ZONE 3
„ 6. Works with SONOS
Change the settings to connect with the Sonos Connect.
(SONOS-1/SONOS-2/SONOS-3)
‰ Input Selector (Default Value: Off)
Select the input selector to which the Sonos Connect is connected.
• Selecting "Off" disables the interlock function with Sonos.
‰ Connected Device (Default Value: -)
Displays the Sonos Connect connected to the same network as the network of
this unit. Press the ENTER button to select the connected Sonos Connect.
• Products (e.g. Play:3 unequipped with an output terminal) other than the
Sonos Connect are also displayed in the device list and selectable. In
that case, when playback on the Sonos side starts, the input is switched,
however, audio is not output. Select the room name of the connected Sonos
Connect.
• Up to 32 devices can be displayed on the Sonos product list screen. If you
cannot find the Sonos Connect to be interlocked, return to the previous
screen, turn off the product you do not want to interlock, and try again.
• To use this function, set "Input Selector" beforehand.
Setup Setup
156