Onkyo TX-RZ70 Instruction Manual page 181

„ Linked operation
‰ HDMI linked operation does not work with CEC-compliant devices, such as a TV
• In the Setup menu of the unit, set "Hardware" - "HDMI" - "HDMI CEC" to "On".
• It is also necessary to set HDMI linking on the CEC-compliant device. Check the instruction manual.
• When connecting a Sharp brand player or recorder to the HDMI IN jacks, set "Hardware" - "HDMI" - "HDMI Standby Through" to "Auto" on the
Setup menu.
„ Tuner (North American and Taiwanese models)
‰ Poor reception or much noise
• Recheck the antenna connection.
• Move the antenna away from the speaker cord or power cord.
• Move the unit away from your TV or PC.
• Passing cars or airplanes in the vicinity can cause interference.
• If radio waves are blocked by concrete walls, etc., radio reception may be poor.
• Change the reception mode to mono ( →p89).
• When listening to an AM station, operating the remote controller may cause noise.
• FM reception may be clearer if you use the antenna jack on the wall used for the TV.
„ BLUETOOTH function
• Unplug and plug the power cord of the unit, or turn off and on the BLUETOOTH enabled device. Restart of the BLUETOOTH enabled device
may be effective.
• BLUETOOTH enabled devices must support the A2DP profile.
• Because a radio wave interference will occur, this unit may not be used near devices such as a microwave oven or cordless phone which use
the radio wave in the 2.4 GHz range.
• A metallic object near the unit can affect on the radio wave, and BLUETOOTH connection may not be possible.
Check the following if the problem persists after you have confirmed the above.
‰ Cannot transmit from a BLUETOOTH wireless technology enabled device (PC, smartphone, etc.) to
this unit
• Check if the BLUETOOTH function of the BLUETOOTH enabled device is enabled.
Troubleshooting
( →p147)
( →p74)
181