Onkyo TX-RZ70 Instruction Manual page 11

Part Names
Front Panel (North American and Taiwanese models)
A B C
H I J
A
ON/STANDBY button
B PURE AUDIO button/indicator: Switches to the
Pure Audio mode. The indicator lights when the
mode is on. ( →p201)
C HYBRID STANDBY indicator: Lights up when
any of the following functions is working or
enabled in standby state of this unit. When this
indicator is lighting, the power consumption in
standby state increases, however, the increase in
D E
power consumption is minimized by entering
the HYBRID STANDBY mode where only the
essential circuits operate.
– HDMI CEC ( →p147)
– HDMI Standby Through ( →p147)
– USB Power Out at Standby ( →p154)
– Network Standby ( →p155)
– Bluetooth Wakeup ( →p155)
D Display ( →p15)
European, Australian and Asian models ( →p13)
F G
E Remote control sensor: Receives signals from
the remote controller.
• The reception range of the remote controller
is within a distance of approx. 16´/5 m, and
an angle of 20° in vertical direction and 30° to
right and left.
F Input selector buttons: Switches the input to be
played.
G ZONE 2/ZONE 3 buttons: Controls the
multizone function. ( →p107)
OFF button: Switches the multi-zone function
off.
H LISTENING MODE button/dial: Press the
LISTENING MODE button (above) to select a
category from "Movie/TV", "Music" and "Game",
and then turn the LISTENING MODE dial (below)
to change the listening mode (
I TONE button: You can adjust the sound quality
of the speakers. Press the TONE button to select
an item to adjust from "BASS", "VOCAL" and
"TREBLE", and press + and - to adjust.
J Front flap
K
K MASTER VOLUME
→p83,
p191).
11