Onkyo TX-RZ70 Instruction Manual page 137

2. Speaker
„ 3. Distance
Set the distance from each speaker to the listening position.
‰ Front Left
(Default Value: 12.0 ft/3.60 m)
Center (Default Value: 12.0 ft/3.60 m)
Front Right (Default Value: 12.0 ft/3.60 m)
Height 1 Left (Default Value: 9.0 ft/2.70 m)
Height 1 Right (Default Value: 9.0 ft/2.70 m)
Height 2 Left (Default Value: 9.0 ft/2.70 m)
Height 2 Right (Default Value: 9.0 ft/2.70 m)
Surround Right (Default Value: 7.0 ft/2.10 m)
Surr Back Right (Default Value: 7.0 ft/2.10 m)
Surr Back Left (Default Value: 7.0 ft/2.10 m)
Surround Left (Default Value: 7.0 ft/2.10 m)
Subwoofer 1 (Default Value: 12.0 ft/3.60 m)
Subwoofer 2 (Default Value: 12.0 ft/3.60 m)
• Default values vary depending on the regions.
• The unit of distance can be changed by pressing the MODE button on the
remote controller. When the unit is set as feet, you can set between 0' 0" 1/2
and 30' 0" in increments of 1/2. When using the unit "meter", the setting is
available in increments of 0.01 m from 0.01 m to 9.00 m.
• When measurements are made using Dirac Live (
displayed as "msec" and the value cannot be changed.
(Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right,
Surr Back Left):
• Depending on the use of the ZONE speakers, it may not be possible to select
this setting.
„ 4. Level Calibration
Adjust the volume level of each speaker.
‰ Front Left
Select a value between "-12.0 dB" and "+12.0 dB" ("-15.0 dB" and "+12.0 dB"
for Subwoofer) (in 0.5 dB increments). A test tone will be output each time you
change the value. Select the desired level.
(Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right,
→p166,
p170), units are
Surr Back Left):
• Depending on the use of the ZONE speakers, it may not be possible to select
(Default Value: 0.0 dB)
Center (Default Value: 0.0 dB)
Front Right (Default Value: 0.0 dB)
Height 1 Left (Default Value: 0.0 dB)
Height 1 Right (Default Value: 0.0 dB)
Height 2 Left (Default Value: 0.0 dB)
Height 2 Right (Default Value: 0.0 dB)
Surround Right (Default Value: 0.0 dB)
Surr Back Right (Default Value: 0.0 dB)
Surr Back Left (Default Value: 0.0 dB)
Surround Left (Default Value: 0.0 dB)
Subwoofer 1 (Default Value: 0.0 dB)
Subwoofer 2 (Default Value: 0.0 dB)
this setting.
Setup Setup
137