H Save & Exit - Fetco TBS-122D Users Manual And Operator Instructions

H SAVE & EXIT
The brewer will save changes only from the "H" menu. DO NOT reboot brewer or toggle ON/OFF-exit as below.
TO EXIT PROGRAMMING & HOW TO SAVE CONTROL SETTING CHANGES
HOW TO SAVE CHANGES AND EXIT-The brewer is in PROGRAMMING mode
A convenient way to access the steps is to remember to scroll to EXITYES and to SAVE YES
PROGRAMMING
A-G
STOP
From any screen-
Press STOP button
until the EXIT ("G")
screen appears
NOTE: User Settings will be erased and overwritten to factory default settings by the following five programming changes
1) When setting or changing units of display for the tank temperature (F Fahrenheit or C Celsius). (SETTING B5)
2) When setting or changing units of display for the volume (L liters, G gallons).
3) When setting brewer model The software sets equipment to brewer defaults
4) When loading from USB (Reprograms settings)
5) When restoring defaults (Reloads to defaults )
Go to fetco.com for the latest versions of all information
Saving changes and exiting PROGRAMMING
EXIT
G NO +
STOP STOP
From the "G" screen From EXIT screen
Press button 2 to Press button 1 to
toggle to the EXIT- toggle to the SAVE
YES screen
EXIT
G1
G YES -
STOP
From SAVE screen
Press button 2 to
toggle to the SAVE-
screen YES screen
User Guide & Operator instructions
Page 14
.
SAVE SAVE
NO +
G1
STOP
To SAVE and EXIT
Press button 1 to
SAVE your changes
and EXIT to
OPERATING MODE
(SETTING B6)
(SETTING F3)
(SETTING F9)
(SETTING F10)
P209 REV002 August 2023
YES -