Table of Contents
Advertisement
Water Requirements:
Water inlet fitting (Dual Water Inlet Connector Assembly) is to a
1/4 inch male flare.(Please see page 23)
Pressure: 20-75 psig, (138-517kPa) 1½gpm/(5.7lpm)
For Iced tea: brewer is factory calibrated to a non-fluctuating
stable water supply pressure at 45 psi.
Water supply: (Optimal) 100-150TDS
All beverage equipment must use filtered water
Brew Volume-Iced Tea: Full Batch 3 gallons/11.40 liters
User adjustable to up to 4.9 gallon/18.7 liters per brew
Brew batch and dilution ratio user adjustable. See right
Total Brew Cycle—Iced Tea-(Batch 1)
6:45 minutes=[3:00 minute brew time + 1:30 minute drip delay + 0:10 dilution delay + 3:35 dilution]
Batch 2 and batch 3 may be enabled and will set by machine for batch 1 by default or as defined by user
Brew-Process parameters are user controllable for: Brew Volume, Brew Time, Prewet Percent and Delay,
Drip Delay, Tea Batch Temperature, Dilution Volume and Dilution Timing (with brew or after brewing)
Coffee Filter FETCO# F001 or 15" X 5 ½ "
Single dilution brewer has a s
Electrical Specifications for single domestic- 120 volt cord and plug
SKU
T1221US-1A117-PM001
Domestic
Electrical Specifications for single International- CEE 7/7 "Shucko" cord and plug
SKU
T1221IN-1B130-PN005
T1221CE-1B130-PN005 CE
Dual dilution brewer has a round brew basket to change the brew position from left to right for the dual dilution option.
Note: The "D" in the SKU is for dual-dilution.
Electrical Specifications for Dual domestic- 120 volt cord and plug
SKU
T122DUS-1A117-PN001
Domestic
Electrical Specifications for Dual International- CEE 7/7 "Shucko" cord and plug
SKU
T122DIN-1B130-PN005 (Int)
T122DCE-1B130-PN005 (CE)
Weights and Capacities
Model
Height
TBS-1221
36 5/8 in
Brewer
930 mm
TBS-122D
36 5/8 in
Brewer
930 mm
Go to fetco.com for the latest versions of all information
Specifications and Requirements
quare plastic brew basket with set of nine orifices
Electrical
Dilution
Connection
Single
NEMA 15-5P
Electrical
Dilution
Connection
Single
CEE 7/7
Single
CEE 7/7
Electrical
Dilution
Connection
Dual
NEMA 15-5P
Electrical
Dilution
Connection
Dual
CEE 7/7
Dual
CEE 7/7
Water tank
Width
Depth
capacity
9 1/4 in
22 in
2.7 gallon
235 mm
560 mm
9 1/4 in
22 in
2.7 gallon
235 mm
560 mm
Electrical: Supplied with 120V cord & plug
Tank Temperature, as set by factory:
200°F (93°C) inside water tank (at sea level)
Iced Tea Batch Temperature-user adjustable
200°F-207°F-/ 93°-98°C
Iced Tea Dilution Ratio: 1:4 factory set brew to water
Factory setting adds 2.4 gallons of cold water to 0.6 gallon
brew for a 1:4 ratio Iced tea
(2.3liter brew/9.1 liter dilution)
Dilution volume is user adjustable from 0-4Gal;0-15.2L
Dose: 2.5 oz to 4.0 oz
Heater
Voltage
Configuration
1 X 1.7 kW
100-120 1.2-1.7 12.3-14.7
Heater
Voltage
Configuration
1 X 3.0 kW
200-240 2.1-3.0 10.9-13.0
1 X 3.0 kW
(Round plastic brew basket with set of nine orifices)
Heater
Voltage
Configuration
1 X 1.7 kW
100-120 1.2-1.7 12.3-14.7
Heater
Voltage
Configuration
1 X 3.0 kW
200-240 2.1-3.0 10.9-13.0
1 X 3.0 kW
Empty
Filled
Weight
Weight
35 lbs
60 lbs.
10.1 L
15.9 kg
27.2 kg
37 lbs
62 lbs.
10.1 L
16.8 kg
28.1 kg
User Guide & Operator instructions
Page 2
KW
Amp Draw
KW
Amp Draw
230
2.8
12.5
KW
Amp Draw
KW
Amp Draw
230
2.8
12.5
Shipping
Shipping Dimensions
Weight
50 lbs.
39 x 27" x 11.5"
22.7 kg
991mmX686X292mm
52 lbs.
39 x 27" x 11.5"
23.6 kg
991mmX686X292mm
P209 REV002 August 2023
Est.3gal
Batches/Hour
6
Est. 11.4 L
Batches/Hour
8-9
9
Est.3gal
Batches/Hour
6
Est. 11.4 L
Batches/Hour
8-9
9
Advertisement
Table of Contents
