F Service Menu; G Save & Exit - Fetco CBS-1221 Users Manual And Operator Instructions

F SERVICE MENU

POSITION Program Items
F1 Display Firmware
F2 Display Bootloader
F3 Select Model
F4 Customer Name
F5 Customer Name
F6 Backup to USB
F7 Restore From USB
F8 Restore Defaults
F9 Demo Mode
F10 Error Log
F11 Erase Error Log
F12 Service Phone #
G SAVE & EXIT
The brewer will save changes only from the "G" menu. DO NOT reboot brewer or toggle ON/OFF-exit as below.
TO EXIT PROGRAMMING & HOW TO SAVE CONTROL SETTING CHANGES
HOW TO SAVE CHANGES AND EXIT-The brewer is in PROGRAMMING mode
A convenient way to access the steps is to remember to scroll to EXITYES and to SAVE YES
Programming A-F
A-F
STOP
From any screen-
Press STOP button
until the EXIT ("G")
screen appears
NOTE: User Settings will be erased and overwritten to factory default settings by the following five programming changes
1) When setting or changing units of display for the tank temperature (F Fahrenheit or C Celsius). (SETTING B3)
2) When setting or changing units of display for the volume (L liters, G gallons).
3) When setting brewer model The software sets equipment to brewer defaults
4) When loading from USB (Reprograms settings)
5) When restoring defaults (Reloads to defaults )
Go to fetco.com for the latest versions of all information
Software & Code View and Settings
Factory set Default Programming Range
1.0.201001
1.0.200930
CBS-1221
&
CBS-1222
Will need reboot
Off
(only if above is
"ON)
NO
DEMO ON/OFF
Lists up to six
codes, in order
NO +
Saving changes and exiting PROGRAMMING
EXIT
G NO +
STOP
From the "G" screen
Press button 2 to
toggle to the EXIT-
YES screen
Scroll to brewer
model Save & Exit
NO or YES
Scroll with batch keys
Follow prompts
Applies settings
from USB
NO/YES
1: ; 2: ;3:;4: ;5: ;6:
1=Newest/6=Oldest
LAST six errors only
EXIT
G YES -
STOP
From EXIT screen From SAVE screen
Press button 1 to
toggle to the SAVE toggle to the SAVE-
screen
User Guide & Operator instructions
Page 8
Increments
CBS—1221
(Single side)
CBS—1222
(Dual side)
For name on screen
A-Z;a-z;0-9
Saves
settings
Demonstrates the controls
components in demo mode
Newest=first
Oldest=last Chart for references
FACTORY USE ONLY .
Toggle +/-
YES or NO
SAVE
G NO +
STOP
STOP
To SAVE and EXIT
Press button 2 to
SAVE your changes
YES screen
OPERATING MODE
P194Re0
Notes
Displays current
version [10/2020]
Displays current
version [9/2020]
NOTE: Overwrites
all user settings
(See below)
16 characters total
Insert blank USB
Insert USB
Will need reboot
Reset to factory
for training. Disables all
See Error Code
DO NOT RESET
Service
.
SAVE
G YES -
Press button 1 to
and EXIT to
(SETTING B4)
(SETTING F3)
(SETTING E7)
(SETTING E8)
November 2020