A Program - Fetco TBS-122D Users Manual And Operator Instructions

A PROGRAM

The settings below are shown for the top batch on a single brewer top left button on a twin brewer.
See how to access all A menus on the previous page. Below are the brew settings for default A1 & A2 batches
POSITION Program Items
A11 Batch Volume
Brew Time
A12
(MIN:SEC)
A13 Prewet Percent
Prewet Delay
A14
(Pause after prewet
completes)
A16 Drip Delay
A170 Dilution Mode
Dilution Delay
A171 (not available for
FAST dilute)
A172 Dilution Volume
A190 Batch Temp.
Batch Enabled
A20
A20 YES - NO +
Batch Enabled
A30
A30 YES - NO +
A4.00 Batch Volume
A4.20 Brew Time
(MIN:SEC)
A4.30 Prewet Percent.
A4.40 Prewet Delay
A4.60 Drip Delay
A4.70 Dilution Mode
A4.71 Dilution Delay
A4.72 Dilution Volume
A4.90 Batch Temp.
Batch Enabled
A50
A50 YES - NO +
Batch Enabled
A60
A60 YES - NO +
A90
Copy Batch
A91
Copy From Batch
Copy From
A92
Paste To Batch?
(PASTE TO)
A20 and A30 (middle and right batches) are shipped disabled must be activated by user.
† DRIP DELAY will not activate when STOP is pressed within 5 seconds of starting a brew time
.
Go to fetco.com for the latest versions of all information
Menu Features: Batch Parameters
Factory set Default Programming Range Increments
78 Oz 33 oz to 135oz
2.20liters 0.94 to 3.9L
3:00 minutes 2:00 – 12:00
0% 0.00 – 25.0%
0% [1:00 Min] [0:10 – 5:00]
1:30 mm:ss 0:30 – 6:00 min.
Normal Normal/Fast
0.10 0:00 –12:00 min
308 oz
9.1 liters 0:00 –15:15 liters
2.4 gallons 0:00 –4:0 gallons
200°F (93°C)
NO
NO
78 Oz 33 oz to 135oz
3:00 minutes 2:00 – 12:00
0% 0.00 – 25.0%
0% [1:00 Min] [0:10 – 5:00]
1:30 mm:ss 0:30 – 6:00 min.
Normal Normal/Fast
0.10 0:00 –12:00 min
308 oz
200°F (93°C)
NO
NO
1 + A91 1 (1-6)
1 + A92.1 (1-6)
Page 6
1 oz
0.05L
30 sec
1%
30 sec
10 sec
10 sec
1-512oz 1 oz
0.05L
0.01G
200-
1 degree
207°F
OFF/ON Select
OFF/ON Select
1 oz
30 sec
1%
30 sec
10 sec
10 sec
1-512oz 1 oz
200-
1 degree
207°F
OFF/ON Select
OFF/ON Select
User Guide & Operator instructions
Notes
Software is in fl, ounce;
Can convert to liters/gallons
Default total brew time is
5:00 minutes
Percentage of total brew
volume
The time between
prewetting and start of brew
cycle.
This feature appears
ONLY if Prewet >0:00
Time brew basket should
remain in place during final
drip-out
Drip delay remains "ON" for
2:00 minutes if STOP is
†
pressed during brew
NORMAL: Dilution after the
brew is completed
FAST: Dilution is during the
brew cycle
Pause after brew to begin
dilution. Often used to add
sweetener
Unit default is fluid ounces.
Can be set for liters and
gallons.
Used to set brewing
temperature for individual
batches (only if B-2 is on)
Batch presets as above
Batch presets as above
See A11 - above
See A12 - above
See A13 - above
See A14 - above
See A16 - above
See A170 - above
See A171 - above
See A172 - above
See A190 - above
Batch presets as above
Batch presets as above
Select recipe to copy
Select where to paste
P209 REV002 August 2023