Replaceable Parts; Introduction; Replaceable Parts List; Ordering Information - HP 8559A Operation And Service Manual

MODEL 8559A
The replaceable parts list breakdown for each
major assembl y is located in Section VIII, following
the circuit description for the assembly. This section
contains information for ordering the replacement
parts not listed in Section VIII. Table 6-1 includes a
list of reference designations and a list of abbrevia-
tions used in the parts list. Table 6-2 lists names and
addresses that correspond to the manufacturer code
numbers in the parts list. Table 6-3 lists the replace-
able parts in alp-ha-numerical order by reference des-
ignation.
6-4. Table 6-3, the list of replaceable parts, is orga-
nized as follows:
1. Major assemblies and their part numbers.
2. Accessories supplied and their part numbers.
3. Miscellaneous chassis parts and their part num-
bers.
4. Mechanical chassis parts and their part num-
bers.
SECTION VI

REPLACEABLE PARTS

6-5. The following information is listed for each
part:
1. The Hewlett-Packard part number.
.
quantity is given only once, at the first appear-
turer of the part.
6. The manufacturer's part number.
6-7. To order a part listed in the replaceable parts
table, quote the Hewlett-Packard part number (with
check digit), indicate the quantity required, and
address the order to the nearest Hewlett-Packard
office. The check digit will ensure accurate and
timely processing of your order.
6-8. To order a part that is not listed in the replace-
able parts table, include the instrument model num-
ber, instrument serial number, the description and
function of the part, and the number of parts
required. Address the order to the nearest Hewlett-
Packard office.
REPLACEABLE PARTS