Table of Contents
Advertisement
SCSI PARITY CHECKING
Select this option to enable or disable the SCSI parity checking
function on the SCSI controller. Figure 3-4 displays the selections.
The default setting is
Enabled
.
Figure 3-4
SCSI Parity Checking Selections
The SCSI controller always checks parity when reading from the
SCSI bus to verify the correct transmission of data from the SCSI
devices. You should disable the SCSI Parity Checking parameter if
any of the installed SCSI devices does not support SCSI parity. Most
currently available SCSI devices support this feature.
Use the
or
keys then press
to select options. Press
at anytime to return to the previous menu.
System Utilities
3-9
Advertisement
Table of Contents
