Table of Contents
Advertisement
7.
Press
to exit the System Security screen and return to the
main menu.
8.
Press
to exit the BIOS utility. A dialog box appears asking if
you want to save the CMOS data.
9.
Select Yes to save the changes and reboot the system.
10. While rebooting, turn off the system then open the housing.
11. Set jumper JP5 to pins 1-2 to enable the password function.
The next time you want to enter the BIOS utility, you must key-in your
Setup password.
Changing or Removing the Setup Password
Should you want to change your setup password, do the following:
1.
Enter the BIOS utility and select System Security.
2.
Highlight the Setup Password parameter.
3.
Press the
or
in a new password.
or
Press the
or
password.
4.
Press
to exit the System Security screen and return to the
main menu.
5.
Press
to exit the BIOS utility. A dialog box appears asking if
you want to save the CMOS data.
6.
Select Yes to save the changes and reboot the system.
2-28
key to display the password prompt and key-
key and select
None
to remove the existing
User's Guide
Advertisement
Table of Contents
