Table of Contents
Advertisement
2.3.6
Setting for SNA Cards
System network architecture (SNA) cards are 8-bit IBM-compatible
network cards. Should you need to install an SNA card, make sure to
set this parameter to
Enabled
2.3.7
Memory at 15MB-16MB
To prevent memory address conflicts between the system and
expansion boards, reserve this memory range for the use of either the
system or an expansion board. Before setting this parameter, check
your add-on card manual to determine if your add-on card needs this
memory space. If not, set this parameter to
2-16
.
System Use
.
User's Guide
Advertisement
Table of Contents
