Table of Contents
Advertisement
Hard Disk 32-bit Access
Enabling this parameter improves system performance by allowing
the use of the 32-bit hard disk access. This enhanced IDE feature
only works under DOS, Windows 3.x, Windows 95, and Novell
NetWare. If your software or hard disk does not support this function,
set this parameter to
Disabled
2.2.10
Large Memory Support Mode
This parameter allows the system to support an extended memory
higher than 64 MB.
Set this parameter to
working with Windows NT 3.1 and the system memory size is greater
than or equal to 64 MB, otherwise, set it to
2.2.11
Num Lock After Boot
This parameter allows you to activate the Num Lock function upon
booting. The default setting is
2.2.12
Memory Test
When set to
, this parameter allows the system to perform a
Enabled
RAM test during the POST routine.
system detects only the memory size and bypasses the test routine.
The default setting is
Disabled
This item is fixed to
Disabled
enabled the Auto Configuration Mode and the Fast Boot Mode
parameters on page 2 of the Basic System Configuration menu. See
sections 2.2.13 and 2.2.14.
2-10
. The default is
Enabled
Advanced
Normal
.
.
Enabled
When set to
.
and is not user-configurable if you
.
if you are
Disabled
, the
User's Guide
Advertisement
Table of Contents
