Table of Contents
Advertisement
Figure 1-9
Installing the RDM Module
3.
Insert the cable end with the RDM button into the slot on the
housing front panel.
4.
Attach the other end of the RDM cable to CN17 (pins 5-6, 11-12)
on the system board. Note that the covered pin of the cable
connector does not connect to any pin.
CN17
Figure 1-10
Connecting the RDM Cable
Refer to the RDM User's Guide for detailed instructions on RDM
installation.
System Board
RDM Cable
6
7
1
1-23
Advertisement
Table of Contents
