4.
Lift up the CPU socket lever.
5.
Look at the underside of the CPU and note the area where the
pins are denser or closely embedded. Gently insert the CPU
pins into the socket, matching the denser pins with the denser
holes on the socket.
Be careful not to bend any pins.
6.
Push down the socket lever.
7.
Connect the CPU fan cable to the fan connector FA1 on the
system board.
STEP 4
CPU Socket Base
Denser Holes
STEP 6
Figure 1-5
Installing a CPU with the Sliding Heat Sink
1-12
STEP 5
Denser Pins
STEP 7
Fan Cable
User's Guide