Table of Contents
Advertisement
2.5
Power Saving Configuration
The Power Saving Configuration parameters are configurable only if
your system supports the power management feature.
The following screens show the Power Saving Configuration
parameters and their default settings:
Power Saving Configuration
Power Management Mode ................ [Enabled ]
IDE Hard Disk Standby Timer ....... [15] Minutes
System Suspend Timer .............. [15] Minutes
System Wakeup Events
IRQ 0 ...... [Disabled]*
IRQ 1 ...... [Enabled ]*
IRQ 3 ...... [Disabled]
IRQ 4 ...... [Disabled]
IRQ 5 ...... [Disabled]
IRQ 6 ...... [Enabled ]
IRQ 7 ...... [Disabled]
↑↓ = Move Highlight Bar,
PgDn/PgUp = Move Screen,
*
Grayed and non-configurable
2-20
IRQ 8 ...... [Disabled]
IRQ 9 ...... [Disabled]
IRQ 10 ..... [Disabled]
IRQ 11 ..... [Disabled]
IRQ 12 ..... [Enabled ]*
IRQ 13 ..... [Enabled ]
IRQ 14 ..... [Enabled ]
IRQ 15 ..... [Disabled]
→ ← = Change Setting
F1 = Help,
Esc
=
Exit
User's Guide
Page 1/1
Advertisement
Table of Contents
