Remote Diagnostic Management; Installing The Rdm Module - Acer 1100 User Manual

1.11

Remote Diagnostic Management

Remote Diagnostic Management (RDM) is a network management
tool that utilizes modems and telephone lines to control a host of
servers from a remote station. It monitors and analyzes the server
condition, updates the BIOS settings if necessary, or reboots the
server in the event of failure and quickly returns it to normal operation.
This capability to execute the RDM program from a remote site
bridges the distance barrier in fixing server problems and reduces
wasted time due to system failure.
1.11.1

Installing the RDM Module

The system board comes with connectors CN30 and CN33 to
accommodate the RDM module.
Follow these steps to install the RDM module and connect the cable:
1. See Figure 1-1 for the location of the RDM connectors.
2. Gently insert the RDM module into CN30 and CN33. The module
fits only in one direction. Do not force it into to the connectors.
CN30
CN33
Figure 1-18 Installing the RDM Module
Refer to the RDM User's Guide for detailed instructions on RDM
installation.
System Board 1-25