Refilling Flexliner - Graco TrueCoat 360 Project Series Owner's Manual

Refilling FlexLiner

If sprayer runs out of paint simply separate
the cup support from the cup cover/sprayer
and refill the FlexLiner.
1. Unplug sprayer from power source.
2. Separate the cup support from the cup
cover/sprayer. Set the sprayer upside
down on a flat surface. This will keep the
wet paint in the cup cover.
334179G
3. Follow steps 2 - 11 in Starting a New
Job, page 10 procedure.
Start Up
ti23369a
13