Graco TrueCoat 360 Project Series Owner's Manual page 19

13. Remove cup assembly and discard used
fluid. Dispose of used cleaning fluid
properly.
14. Replace cleaning fluid and repeat steps
1- 13 until spray output is clean.
IMPORTANT! For best results, do not spray
more than one cup of water through the tip
while cleaning. If more flushing is needed,
remove the tip from the sprayer to avoid
excessive wear.
NOTICE
The spray tip guard is permanently
attached to the sprayer. Removal for
cleaning is not necessary and will result in
damage to the sprayer.
ti31003a
334179G
15. Remove spray tip and strainer, see
Remove Spray Tip, page 22. Clean with
soap and water. A soft brush can be used
to loosen and remove dried material if
needed.
ti23389a
16. Use a soft cloth to clean the cup support
and cup cover.
Cleanup
ti23404a
ti23372a
19