Table of Contents
Advertisement
WARNING
FIRE AND EXPLOSION
HAZARD
Flammable fumes, such as
solvent and paint fumes, in work
area can ignite or explode. To
help prevent fire and explosion:
•
Sprayer generates sparks. Do
not spray or flush with flammable
liquids.
•
Use only water-based materials.
•
Keep spray area well-ventilated.
Keep a good supply of fresh air
moving through the area.
•
Do not spray or clean with
flammable liquids.
•
Paint or solvent flowing through the
equipment is able to result in static
electricity. Static electricity creates a risk of
fire or explosion in the presence of paint or
solvent fumes.
•
Keep sprayer at least 10 in. (25 cm) away
from objects while spraying or flushing.
•
Verify all containers and collection systems
are grounded to prevent static discharge.
•
Connect to a grounded outlet and use
grounded extension cords. Do not use a 3
to 2 adapter.
•
Do not use paints or solvents containing
halogenated hydrocarbons.
•
Do not smoke in the spray area.
•
Do not operate light switches, engines, or
similar spark producing products in the
spray area.
•
Keep area clean and free of paint or
solvent containers, rags, and other
flammable materials.
•
Know the contents of the paints and
solvents being sprayed. Read all Material
Safety Data Sheets (SDS) and container
labels provided with the paints and
solvents. Follow the paint and solvents
manufacturer's safety instructions.
•
Fire extinguisher equipment shall be
present and working.
334179G
Sprayer Safety Information
•
Do not aim the sprayer at, or spray any
person or animal.
•
Keep hands and other body parts away
from the discharge. For example, do not try
to stop leaks with any part of the body.
•
Disconnect power when not spraying.
•
Always use the spray tip guard. Do not
spray without spray tip guard in place.
•
Use caution when cleaning and changing
spray tips. In the case where the spray tip
clogs while spraying, follow the Pressure
Relief Procedure, page 17 for relieving
the pressure before removing the spray tip
to clean.
•
Do not leave the unit energized or under
pressure while unattended. When the unit
is not in use, unplug the sprayer and follow
the Pressure Relief Procedure, page 17.
•
Check parts for signs of damage. Replace
any damaged parts.
•
This system is capable of producing 2000
psi. Use replacement parts or accessories
that are rated a minimum of 2000 psi.
•
Do not carry the unit with a finger on the
trigger.
•
Verify that all connections are secure
before operating the unit.
•
Know how to stop the unit and bleed
pressure quickly. Be thoroughly familiar
with the controls.
WARNING
SKIN INJECTION HAZARD
High-pressure spray is able to
inject toxins into the body and
cause serious bodily injury. In
the event that injection occurs,
get immediate surgical
treatment.
7
Advertisement
Table of Contents
