Refilling Flexliner - Graco Ultra Operation, Parts

Start Up

Refilling FlexLiner

If sprayer runs out of paint simply separate
the cup support from the cup cover/sprayer
and refill the FlexLiner.
1. Remove battery from the sprayer and
open the VacuValve to allow air into the
FlexLiner.
2. Separate the cup support from the cup
cover/sprayer. Set the sprayer upside
down on a flat surface. This will keep the
wet paint in the cup cover.
12
3. Follow steps 2 – 12 in Starting a New
Job, page 9.
ti29742a
3A4476E