Led Indication, Co Line - Panasonic KX-TD816AL Installation Manual

L
Programming References
Feature References
Operation References
—User Manual
L
ED Indication, CO Line
Description
3-74 Features
• After dialing an extension number, the user will hear one of the
following:
Ringback tone: indicates that the other extension is being
called.
Confirmation tone: indicates that the user can perform Voice
Calling.
Busy tone: indicates that the other extension is busy.
Do Not Disturb tone: indicates that the other extension has
DND assigned.
Section 4, System Programming,
[003] Extension Number Set
[004] Extension Name Set
[005] Flexible CO Button Assignment
[100] Flexible Numbering, 1st through 16th hundred extension blocks
Station Programming.......................................................User Manual,
Flexible Button Assignment – DSS Button
Section 3, Features,
Busy Lamp Field
DPT Features, SLT Features;
Intercom Calling
The LED (Light Emitting Diode) indicators of the buttons
associated with CO lines tell the line conditions with a variety of
lighting patterns. This allows the user to determine which lines are
idle and which lines are in use. The table below shows the lighting
patterns and line conditions according to the CO button type.
LED Indicator
Off
Green On
Green slow flash
Green moderate flash
Green rapid flash
Red On
Red slow flash
3
Button, Direct Station Selection
(DSS)
CO Line Status
Idle
I-use
I-hold
I-Exclusive Hold / CO-to-CO call /
Unattended Conference
Hold Recall / Incoming call
Other-use
Other-hold
Features