System Programming With Digital Proprietary Telephone - Panasonic KX-TD816AL Installation Manual

S
Programming References
Feature References
Operation References
S
ystem Programming with Digital Proprietary Telephone
Description
Conditions
Programming References
3-114 Features
• System administration can be performed on-line except for the
procedures of diagnosis.
If the system goes off-line, the system functions as if it was in power
failure. (Refer to Power Failure Transfer feature.)
Section 4, System Programming,
[107] System Password
[813] Floating Number Assignment
[814] Modem Standard*
Section 3, Features,
System Programming with
Digital Proprietary Telephone
Not applicable.
This system can be programmed with a personal computer or a
digital proprietary telephone (DPT).
DPTs available for system programming are: KX-T7235 and KX-
T7230 (Display DPTs).
Two extensions are allowed to perform system programming. The
extensions available are:
(1) An extension that is connected to jack 1.
(2) An extension that is assigned as a manager.
For more information and programming instructions, refer to
Section 4, "System Programming."
• During system programming the system operates normally.
• During system programming the extension is considered to be busy.
• The display on the DPT permits interactive programming.
• Only one access is allowed to system programming at any one time.
• To access system administration, a valid password must be entered.
The password is factory-programmed and can be changed.
• A personal computer can be used to perform system programming.
Section 4, System Programming
[006] Operator / Manager Extension Assignment
[107] System Password
3 Features
Station Message Detail
Recording (SMDR)
*: Available for KX-TD1232 only.