End-To-End Dtmf Signaling (Tone Through); Extension Group - Panasonic KX-TD816AL Installation Manual

E
Programming References
Feature References
Operation References
—User Manual
E
nd-to-End DTMF Signaling (Tone Through)
Description
Conditions
Programming References
Feature References
Operation References
E
xtension Group
Description
3-62 Features
Section 4, System Programming,
[100] Flexible Numbering, Electronic station lockout set / cancel
[990] System Additional Information, Field (15)
Section 3, Features,
Remote Station Lock Control
DPT Features, SLT Features;
Electronic Station Lockout
DTMF signaling is required for access to special network services
offered by some telephone companies. This system allows the
proprietary telephone user to send DTMF signals to the line during
an established call.
• If the dial type of the line is assigned to DTMF, Tone Through mode is
established automatically after the dialing sequence is finished and the
call is established.
• If the dial type of the line is assigned to dial pulse, Tone Through mode
is established after the dialing sequence is finished and the " #"
buttons are pressed (Pulse to Tone Conversion).
• This function also applies to extension and conference calls.
No programming required.
Section 3, Features,
Dial Type Selection
Not applicable.
The system supports 16 extension groups. Any member of an
extension group can pick up a call directed to another group
member (Group Call Pickup). In addition, there are Paging – Group
and Station Hunting features.
3 Features
Pulse to Tone Conversion