Table of Contents
Advertisement
3
Features
L
ine Access, Direct
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
L
ine Access, Individual
Description
Conditions
Allows the digital proprietary telephone user to select a CO line by
pressing an idle CO button, which automatically establishes
handsfree operation mode and allows the user to perform On-Hook
Dialing. The user need not press the SP-PHONE button,
MONITOR button nor lift the handset.
• There are three types of CO buttons which can be programmed on an
extension: Single-CO button, Group-CO button, and Loop-CO button.
• Each extension is subject to system programming items for CO lines
available to access.
Section 4, System Programming,
[005] Flexible CO Button Assignment
[211] Dial Start Tim
[400] CO Line Connection Assignment
[605]–[606] Outgoing Permitted CO Line Assignment — Day / Night
Station Programming.......................................................User Manual,
Flexible Button Assignment – Group-CO (G-CO) Button, Loop-CO (L-
CO) Button, Single-CO (S-CO) Button
Section 3, Features,
Button, Group-CO (G-CO)
Button, Loop-CO (L-CO)
Button, Single-CO (S-CO)
DPT Features,
Outward Dialing – Line Access, Automatic, Line Access, CO Line
Group, Line Access, Individual
Allows the digital proprietary telephone user one-button access to a
CO line without having to dial a line access code.
• Each extension is subject to system programming items for CO lines
available to access.
• This feature requires a Single-CO (S-CO) button assignment on a
proprietary telephone.
• The system waits for a programmed time before dialing after a CO line
is seized.
CO Line Connection Assignment
– Outgoing
Features
L
3-79
Advertisement
Table of Contents
