Table of Contents
Advertisement
R
R
edial, Automatic
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
R
edial, Last Number
Description
Conditions
3-98
Features
This is a special feature for the digital proprietary telephones, that
provides automatic redialing of the last dialed, saved number or call
log, if the called party is busy. If the Last Number Redial, Saved
Number Redial or CO Outgoing Call Log operation is performed
handsfree, the telephone set will hang up and try again after a pre-
determined period of time.
• Redial Repeat Time and Interval Time can be changed by system
programming.
• Pressing RECALL button allows the system to cancel this feature.
• If any dialing operation is done during Automatic Redial, this function
is finished.
• This feature is not available with KX-T7250.
Section 4, System Programming,
[209] Automatic Redial Repeat Times
[210] Automatic Redial Interval Time
Section 3, Features,
Redial, Last Number
DPT Features,
Redial, Automatic
Every telephone in the system automatically saves the last
telephone number dialed to a CO line and allows the extension user
to dial the same number again.
• With a digital proprietary telephone, REDIAL button is used to carry
out Last Number Redial. With a single line telephone, the feature
number is used.
• The memorized telephone number is replaced by a new one if at least
one digit to be sent to a CO line is dialed. Dialing a CO line access code
alone does not change the memorized number.
• Certain types of proprietary telephones allow automatic multiple
redialing (Automatic Redial).
3
Features
Redial, Saved Number
Advertisement
Table of Contents
