Jabra PANACAST 50 Administrator's Manual page 8

2.3 Powering the PanaCast 50 Video Bar System on and off
The PanaCast 50 Video Bar System will turn on once it is plugged into a power
source. To turn off the PanaCast 50 Video Bar System you must unplug the power
cable from the system. The PanaCast 50 Video Bar System does not have a power
button.
Do not unplug the power to the PanaCast 50 Video Bar System during maintenance
(for example, when running a software update).
The video bar is powered by an included 12V DC power supply. Do not use third-
party power supplies. If a replacement power supply is required please contact
Jabra.
The touch controller uses Power over Ethernet (PoE) which can be provided by an
802.3af or better PoE switch or by the included PoE adapter. The touch controller
requires 15.4W available power.
8