Jabra PANACAST 50 Administrator's Manual page 35

Initial setup
The video bar and touch controller are pre-paired at the factory. During setup the
touch controller will automatically search for the video bar on the network. If the
touch controller cannot discover the video bar on the network, a menu option will
appear in the Setup Wizard to search for an additional video bar.
Once the video bar and touch controller are paired, the VaaS provider can be
selected and setup in the Setup Wizard. The underlying technology and experience
of the VaaS setup is controlled by the VaaS provider.
Re-pairing after reset
A factory reset of the video bar and touch controller will result in the same pairing
experience as the initial installation. The touch controller will search for the factory
pre-paired video bar. The VaaS provider will need to be selected and setup again
using the Setup Wizard.
35