Jabra PANACAST 50 Administrator's Manual page 43

5.2 Settings
All Jabra PanaCast 50 Video Bar System settings can be configured using the Web
Console. To access the Web Console, enter the IP address of the video bar or touch
controller in a browser. The IP address is displayed on the installation screen during
the configuration process of the Jabra PanaCast 50 Video Bar System. The IP
address is also available in the About section of the Device settings menu on the
touch controller.
Camera modes
The PanaCast 50 Video Bar System has 4 camera modes, which can be configured
locally using the touch controller or video bar, or remotely using the Web Console.
Only one Camera mode can be active at a time.
• Intelligent Zoom
• Virtual Director
• Dynamic Composition - Single Stream
• Panoramic View - Manual
Note: Camera modes cannot be set on the video bar when Zoom Rooms is the selected VaaS provider.
43