Jabra PANACAST 50 Administrator's Manual page 49

The PanaCast 50 Video Bar System supports only three video modes in the Zoom
Rooms admin portal: Manual Mode, Speaker Focus, and Auto-Framing. Each mode
corresponds to an equivalent setting in the Jabra PanaCast 50 Video Bar System.
In Zoom Device Manager – Room Management – Zoom Room – Select your room –
Room Settings – In Room Profile you can configure your video modes.
While in a meeting using the touch controller you can access Camera Control in this
menu you can configure:
• Up to 3 Presets
• Change video modes for Speaker Focus to Auto Framing
Below we have the option to manually control the video or set the video to Speaker
Focus or Auto-Framing this gives the meeting extra in room.
Refer to the following article on how to configure default camera mode for Zoom
Rooms : https://support.zoom.us/hc/en-us/articles/17803256431757-Configuring-
default-camera-control-mode
Note: Meeting presets, setting camera to preset position, and camera pan/tilt is
only available in the Zoom Application.
49