Jabra PanaCast 50 Video Bar System MS
What are the steps for setting up the Jabra PanaCast 50 Video
Bar System?
Here is an overview of the steps required to set up the Jabra PanaCast
50 Video Bar System.
1. Install the video bar.
2. Connect the cables.
3. Set up the touch controller.
1. After the device powers on, follow the setup wizard displayed on
the touch controller.
2. During the last step of the configuration, it is necessary to log
into the video conferencing account of your service provider.
4. Manage settings and devices locally using the touch controller or
remotely using the Web Console.
Use the touch controller
1. Go to the More menu in the video conferencing app, and select
Settings, Device settings.
2. The Jabra PanaCast 50 Video Bar System settings screen will be
displayed.
3. Go to the Admin menu and log in as an administrator. If this is the
first login, the default username is admin and the password is the
last 6 digits of the serial number of the touch controller .
Use the Web Console
https://www.jabra.in/supportpages/jabra-panacast-50-video-bar-system/8501-
234/faq/46bd53e2-21a4-4106-914b-ff049687a636
03/03/2024 00:37
Page 1 of 2