Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
STEP 3
Insert the STOPPER SHAFT(30) through the hole in the CENTER BEAM(2). Screw two STOPPERS(29)
onto both ends of the STOPPER SHAFT(30) and tighten at the same time.
STEP 4
Attach the REAR SUPPORT(1) to the CENTER BEAM(2) with BUTTON HEAD BOLTS(M8x1.25x15mm)
(21) and WASHERS(M8)(12). Press The OVAL CAP(31) into the back end of the CENTER BEAM(2).
8
Advertisement
Table of Contents
