Stamina inmotion 35-0123B Owner's Manual page 10

ASSEMBLY INSTRUCTIONS
STEP 9
Insert the PEDAL SHAFT(19) through holes located on the CENTER BEAM(2). Slide a PEDAL SPACER(20)
and a PEDAL CAP(18) onto each end of the PEDAL SHAFT(19). Then secure the PEDAL CAPS(18) with
BUTTON HEAD BOLTS(M8x1.25x15mm)(21) and LARGE WASHERS(M8)(22) at both ends of the PEDAL
SHAFT(19). You need to use two Allen Wrenches to tighten the BUTTON HEAD BOLTS(M8x1.25x15mm)
(21) at both ends of the PEDAL SHAFT(19) at the same time.
10