Stihl RM 443.1 T Instruction Manual page 28

English
► Press cable (8) into the holder on handle (9).
► Press cable (10) into the holder on han‐
dle (11).
► Detach the spark plug socket.
► Press control bar for mowing (12) to handle‐
bar (6) and hold.
► Slowly pull starter handle (13) in the direction
of starter rope guide (14).
► Hook starter handle (13) into starter rope
guide (14).
► Release control bar for mowing (12).
► Re-attach the spark plug socket.
Handlebar (6) must not be dismantled again.
6.2 Assembling, Attaching and
Detaching the Grass Catcher
Box
6.2.1 Assembling the Grass Catcher Box
► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).
Openings (3 and 4) must align.
► Press pins (5) through openings (3 and 4)
from the inside.
28
6 Assembling the Lawn Mower
► Press upper part of grass catcher box (1)
downwards.
Upper part of grass catcher box (1) engages
with a click.
6.2.2 Attaching the Grass Catcher Box
► Stop the engine.
► Place the lawn mower on a level surface.
► Open discharge flap (1) and hold it open.
► Take hold of grass catcher box (2) by han‐
dle (3) and attach with lug (4) in discharge
chute (5) and hooks (6) in mountings (7).
► Set down discharge flap (1) on grass catcher
box (2).
6.2.3 Detaching the Grass Catcher Box
► Stop the engine.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the
handle.
► Close the discharge flap.
6.3 Adding Engine Oil
The engine oil lubricates and cools the engine.
The engine oil specification and capacity can be
found in the engine instruction manual.
NOTICE
■ The lawn mower does not contain any engine
oil on delivery. Starting the engine with no or
too little engine oil may damage the lawn
mower.
► Always check the engine oil level before
starting and if necessary top up.
0478-111-9951-B