Delta A1500 Series User Manual page 86

User Manual
A1500
AC Power Source
:AC
:DC
:DVOLtage
:AC
:DC
:FREQuency
:DFRequency
:SPHase
:DWELl
:COUNt
SYNThesis
:AMPLitude
:PHASe
TRIG
NPHase
VERion:DSP
VERion:LCM
VERion:UI
INSTrument:NSELect
SYSTem:ERRor
83 │ www.deltaww.com
Set(query) start AC voltage of the first step in STEP mode
Set(query) start DC voltage of the first step in STEP mode
Set (query) AC voltage change of each step in STEP mode
Set (query) DC voltage change of each step in STEP mode
Set(query) start frequency of the first step in STEP mode.
Set(query) frequency change of each step in STEP
mode.
Set(query) start phase angle at STEP mode.
Set(query) output duration of each step in STEP mode.
Set(query) how many steps to execute in STEP mode.
Set(query) which synthesis waveform to use. There are
DST30、DST31available
Set (query) voltage amplitude for each order of harmonic
waveforms.
Set (query) phase for each order of harmonic waveforms.
Set (query) trigger status. Disabled when OUTPut:MODE
= FIXE
Set(query) output mode:
Query firmware version.
Query firmware version used for LCM.
Query firmware version of UI.
Set specific output phase to responce queries
Query error status