Delta A1500 Series User Manual page 40

User Manual
A1500
AC Power Source
2. Rotate knob to change <OFF>to <TRIG>, press
3.6.5 Power On State
A1500 SERIES may set different operation modes or enable turn on output immediately
next time after AC is on. Output voltage and frequency depend on stored parameter before
AC input is off.
Example below shows how to set output is ON, output mode is AC+DC, AC voltage is
100Vac, DC voltage is 50Vdc, frequency is 50Hz for next time after AC is on：
Save
1. Press
2. Rotate knob to change<Off>to<On>, press
Save
3. Press
37 │ www.deltaww.com
Recall
Save Recall
or to move cursor to Output
▲ ▼
▲ ▼
Save Recall Recall
or to move cursor to V.
▲ ▲ ▼ ▼
to confirm the change
Enter
to confirm the change
Enter