BenQ SX920+ User Manual page 57

System Setup: Basic menu
Function
Language
Projector Installation
Menu Settings
Operation Settings
Remote Receiver
Panel Key Lock
Background Color
Splash Screen
Test Pattern
Sets the language for the On-Screen Display (OSD) menus. See
menus" on page 25 for details.
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See "Choosing a location" on page 13
Menu Display Time
Sets the length of time the OSD will remain active after your last key press. The
range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets whether to display the OSD messages about the status of detecting signals.
Direct Power On
Sets whether to turn the projector directly on without pressing the
POWER key on the projector or
I
I
projector is plugged in.
Signal Power On
Sets whether to turn the projector directly on without pressing the
POWER key on the projector or
I
I
projector is in standby mode and the signal is feed through the VGA cable.
Auto Power Off
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Power Off" on page 62
Blank Timer
Sets the image blank time when the Blank feature is activated, once elapsed the
image will return to the screen. See
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 12 hours.
Allows you to choose to activate or turn off the Front, Top, or Front+Top
remote control IR sensors. When Remote Receiver is set to Off, press and
hold the SOURCE key on the remote control for 3 seconds to reset to
default status.
Disable or enables all panel key functions except POWER on the projector
and keys on remote control. See
Allows you to choose the color of the background screen that will be displayed
when there is no input source detected.
Allows you to select which logo screen will be displayed during projector start-
up. You can choose BenQ logo screen, Blue screen or Black screen.
See "Using the test pattern" on page 40
The function is only available when the projector detects no input
signal.
Description
for details.
ON on the remote control when the
I
I
ON on the remote control when the
I
I
for details.
"Hiding the image" on page 39
"Locking control keys" on page 39
for details.
Using the projector
"Using the
for details.
for details.
57