BenQ SX920+ User Manual page 53

Picture menu
Function
Picture Mode
Reference Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Picture Settings
Rename User Mode
Picture menu (Advanced)
Function
Black Level
Noise Reduction
Color Temperature
Color Temperature
Fine Tuning
3D Color
Management
Gamma Selection
Brilliant Color
Pre-defined picture modes are provided so you can optimize your projector
picture set-up to suit your program type. See
page 31 for details.
Selects a preset mode that most suits your need for the picture quality and
further fine-tune the picture based on the selections listed below. See
the User 1/User 2 mode" on page 32
Adjusts the brightness of the picture. See
details.
Adjusts the degree of difference between dark and light in the picture. See
"Adjusting Contrast" on page 33
Adjusts the color saturation level -- the amount of each color in a video
picture. See "Adjusting Color" on page 33
Adjusts the red and green color tones of the picture. See
page 33 for details.
Adjusts the picture to make it look sharper or softer. See
on page 33 for details.
Returns all settings in the Picture menu to the factory preset values. See
"Resetting the picture mode" on page 32
Renames User 1 or User 2. See
details.
Sets the picture grayscale as 0 IRE or 7.5 IRE. See
page 34 for details.
Adjusts the picture quality. See
details.
There are several color temperature settings available. See
temperature*" on page 34
See "Setting a preferred color temperature" on page 35
See "Color Management" on page 35
See "Selecting a Gamma setting" on page 35
See "Adjusting Brilliant Color" on page 35
Description
"Selecting a preset mode" on
for details.
"Adjusting Brightness" on page 33
for details.
for details.
for details.
"Renaming user modes" on page 32
Description
"Setting Black Level" on
"Setting Noise Reduction" on page 34
for details.
for details.
for details.
for details.
"Setting
for
"Adjusting Tint" on
"Adjusting Sharpness"
for
for
"Selecting a color
for details.
Using the projector 53